In several sectors, the need for vertically lifting free flowing bulk material, of any type and size, can be satisfied by the various components of bucket elevators supplied by VAID.
|
| Categories |
 |
The belt bucket elevator are equipped with steel-rope belts permitting a long lifespan and heat resistance up to 130oC. In the bucket elevator boot a bar drum ensures guided return of the belt. An exact parallel guidance is achieved with a parallel tensioning device.
|
Kindly find below the list of the major spares we supply
- Steel Chord Reinforced Belt
- Clamping Device
- Buckets Rubber Strips
- Special hardware for fixing of buckets in belts
- Drive Pulley
- Tail Pulley
- Rubber Lagging Segment for drive pulley.
- Speed Monitor
- Level Indicator
- Belt Runoff Switch
|
|
 |
The bucket elevator with forged central chainis configured for the transport of all types of bulk materials. It also achieves conveying capacities of more than 600t/h at axis distances of more than 60m and in continuous 24/7 operation.
|
Kindly find below the list of the major spares we supply
- Chain
- Drive Sprocket Segment
- Tail Sprocket Segment
- Buckets
- Bearings
- Shafts
- Speed Monitor
- Level Indicator for Boot Casing
|
|
 |
For conveying capacities of over 1300t/h the double chain bucket elevator. Axis distances of more than 60m are also possible. The bucket elevator is a combination of two standard bucket elevators with central chain. Both bucket strands run over the same driveshaft, which is mounted in a pedestal bearing and driven by twin drives.
|
Functions & Features
- Conveying capacities of more than 1300t/h
- Axis distances >60m
- Symmetrical weight distribution for long life of chain and driveshaft
- No mechanical connection between the bucket strands
- Material feed with current divider
- Sprockets mounted separately with clamping axis in order to independently counterbalance chain elongation which may arise long-term
|
|
 |
For bulk materials with high dust generation and up to 150mm particle size there is the bucket elevator with gravity discharge. It runs at reduced conveying speed and discharges the bulk material over the back of the preceding bucket.
|
Functions & Features
- Conveying speed with gravity discharge 0.46 to 1.12m/s
- Special bucket shape (bulk material flows over the back of the preceding bucket into the outlet)
- Bucket widths of 200 to 1,200mm and radius of 240 and 400mm
- Capacities up to 678m3/h
- Double bucket elevator at 1,356 m3/h.
- Sprockets mounted separately with clamping axis in order to independently counterbalance chain elongation which may arise long-term
|
|
